Projects - My Computer
The detailed information about my computer's trademark, hardware, etc.
The following information are given on my Slackware GNU/Linux with GNU/Linux commands.
[flyzhy]@[FlyZhy][~](0)$cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 997.305 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1997.41
[flyzhy]@[FlyZhy][~](0)$cat /proc/meminfo MemTotal: 247380 kB MemFree: 8600 kB Buffers: 4940 kB Cached: 23904 kB SwapCached: 22968 kB Active: 210928 kB Inactive: 13676 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 247380 kB LowFree: 8600 kB SwapTotal: 289160 kB SwapFree: 37972 kB Dirty: 0 kB Writeback: 0 kB Mapped: 198176 kB Slab: 9296 kB CommitLimit: 412848 kB Committed_AS: 586920 kB PageTables: 1472 kB VmallocTotal: 786412 kB VmallocUsed: 6688 kB VmallocChunk: 777964 kB
[flyzhy]@[FlyZhy][~](0)$dmesg|grep "^hda"
hda: Maxtor 6E040L0, ATA DISK drive
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
hda: CHECK for good STATUS
[flyzhy]@[FlyZhy][~](0)$dmesg|grep "^hdd" hdd: SAMSUNG CDRW/DVD SM-316B, ATAPI CD/DVD-ROM drive hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache hdd: CHECK for good STATUS
[flyzhy]@[FlyZhy][~](0)$dmesg|grep usb usbcore: registered new driver usbfs usbcore: registered new driver hub usb 1-1: new full speed USB device using uhci_hcd and address 2 usbcore: registered new driver usb-storage input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:07.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver snd-usb-audio [flyzhy]@[FlyZhy][~](0)$lsusb [flyzhy]@[FlyZhy][~](0)$lsusb -v
[flyzhy]@[FlyZhy][~](0)$lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) [flyzhy]@[FlyZhy][~](0)$lspci -v
Read this page (in Chinese) for more information about hardware management on GNU/Linux.
1. The B (133MHz bus), the E (256K L2 on die), and the EB (both 133MHz bus and 256K L2 on die).
2. This is a general USB Audio Device I bought for my computer.